Contributors

Showing posts with label Flueless gas fires. Show all posts
Showing posts with label Flueless gas fires. Show all posts

Thursday, 11 June 2015

Burley Perception 4264 Flueless Gas Fire

*Special offer only one in stock*

The Burley Perception 4264 is a flueless gas fire so no chimney or flue dont worry!

This Flueless gas inset fire product has a heat output 2.5kW and is a 100% efficient. The Burley Perception 4264 has a Realistic pebble fuel effect and comes with a stunning Black trim and fret.

This flueless gas fire comes standard with Manual control and  Natural Gas option.

The Perception 4264 Flueless gas fire minimum room size is 30m3. Ventilation and Cavity box included with this flueless gas fire!

At Fires2u.com we are selling this gas fire at just £425.00 and this price includes VAT and delivery to England and Wales

 
Introduction
Burley introduced fixed flueless gas fires to Britain in 1999. Although the concept is relatively new in this country, fixed flueless gas fires have a long established history in Japan (where there are 40 million), the United States (approximately 20 million) and Australia. Fixed flueless gas fires give a combination of convenience, efficiency and safety which flued fires can never equal. We have entered an era of spiralling gas prices, gas shortages and global warming. It is short sighted to continue wasting energy at such a rate when there is an alternative product which is superior to flued fires in so many ways.
 
Efficiency
Most of the heat from an open flued gas fire or solid fuel fire goes straight up the chimney. By comparison 100% of the heat generated by a flueless gas fire goes to heating the room. Tests commissioned by Burley compared a 2.5kW flueless gas fire (Burley Environ), a typical 6kW inset flued gas fire (quoted efficiency 59%), a decorative flued gas fire and a 2kW electric fire. These tests showed that the flueless gas fire produced over 3 times more heat per kilowatt than the flued gas fire and over 12 times more heat than the decorative gas fire. In other words the flued gas fire lost over 70% of the heat up the chimney and the decorative fire lost over 90%. If the 15 million flued gas fires in Britain were replaced by flueless fires, the country would save around 23,500,000,000 kilowatts of gas every year (costing £1,600,000,000) which in turn would reduce carbon dioxide emissions by over 4,200,000 tonnes every year.
 
 
As Burley’s flueless gas fires do not rely on a chimney, they provide an unsurpassed level of safety to which flued fires can only aspire. Flues and chimneys can become blocked or adversely affected by down-draughts. Burley flueless gas fires are designed to burn the gas extremely cleanly without a flue. The burnt gases are then passed through a catalytic converter. Every Burley flueless gas fire has an oxygen depletion sensor which constantly monitors the air quality in the room. If the level of oxygen drops by just 1.5%, the fire automatically shuts down. Burley’s production method is unique. Every flueless gas fire we have ever made has been bench run for 30 minutes, during which time we monitor numerous combustion and safety criteria. Burley’s rigid test criteria for combustion are four times stricter than the European standards.

Friday, 25 May 2012

Gas fires at fire2u

With over 300 gas fires for sale you are bound to find a gas fire suitable for you, from traditional outset gas fires to ultra-contemporary gas fires from manufactures such as Flavel fires, Valor fires and Crystal fires, our huge range of gas fires has been carefully chosen so that all customers can find the perfect fire.

If you have No chimney but still wanting a Gas or LPG fire, that is no problem! At Fires2u.com our massive range includes; Balanced flue fires, Powerflue fires and Flueless fires. 

Many of our gas fires our stock item so this means fast and free delivery if  delivery is to mainland UK.  

The Valor Blenheim slimline gas fire is popular fire because of its low cost and its great quality. The Manufacturer Valor came from humble beginnings in a small factory in Birmingham building paraffin heaters Valor has grown to be one of the most synonymous names attached to domestic fireplaces in the modern market.By continually investing in research and development, Valor has stayed ahead of the competition, launching market changing products such as the first ever living flame gas fire, and the Homeflame gas fire, which adorned the homes of millions up and down the UK. Today, Valor are still one of the most recognised names for home heating, with a reputation built on reliability, trust and most importantly safety. You know when you purchase a Valor fire you can do so in the upmost confidence it will serve you for many years to come.

The Flavel Finesse gas fire is the most popular hole-in-the-wall gas fire from Flavel that we have on our website, this stunning gas fire is so versatile and can suit any room it is fitted in! Flavel as a manufacture are becoming the fastest growing gas fire manufacturer in the country with an unequalled reputation for quality and service. There success is due to a combination of uncompromising attitude to design and manufacturing standards and an unprecedented investment in technology and personnel. The Flavel brand is just one part of the BFM manufacturing team which also includes Verine gas fires and Celsi electric fires. This English company is based in Stoke-on-Trent with a 51,000 sq ft purpose built plant, housing the most up-to-date manufacturing facilities.  

The Crystal Diamond gas fire is a Precast model which is only 100mm deep, however still produces a massive 3.9kw output, making it one of the hottest slimline fire on the market today! Crystal fires started in 1990 two brothers, Chris, a gas engineer now with over 30 years of experience and Ian, a skilled sheet metal worker, combined their expertise and opened a retail outlet in Liverpool selling fires made by Ian to be then installed by Chris. Over the years Crystal Fires have worked with the British Gas Testing House for their product development, approvals and licensing and have gone from strength to strength, winning awards on the way for their original innovative designs. 20 years on Crystal Fires are one of the market leaders due to an extensive range of contemporary and traditional Living Flame gas fires, always with the main focus on build quality and product efficiency. This is demonstrated in abundance with the release of their new glass fronted Manhattan, Miami and Montana Royale hole in the wall fires.

So what are you waiting for your perfect gas fire is just a click away at fires2u!



 

Tuesday, 1 May 2012

Gas fires - Which Gas Fire is right for your home?

The type of chimney or flue you have dictates the type of gas fire you can have in your home. But if you’re not sure, then take a look at the below for a simple guide of what fire you will need. It’s worth remembering
that a full depth fire usually requires a traditional chimney whilst slimline gas fires will fit virtually any chimney or flue.

Brick Chimney Fires
This type of flue is easily recognisable by a chimney stack with accompanying terracotta pot or gas terminal on your roof; with these type of flues you can either have a full depth or slimline gas fire. However we always point out with Full depth gas fires make sure you check the depth size of the appliance in comparison to the depth you have in your opening.

Pre-Fabricated Flue Fires
Pre-fabricated flues are dentifiable by a metal flue and terminal on the roof and a metal flue box behind the fire.

Pre-Cast Flue Fires
Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks they form a rectangular section flue. Many customers who have this type of flue can only have slimline gas fire due to the depth in there opening, so to ensure you purchase the correct fire contact fires2u with your depth dimension and we will check this size against the gas fire depth.

No Flue? Have a look at the below options of gas fires that you may be able to have fitted in your home -


Power flue Fires
Powerflue fires use an electronically driven fan unit mounted on the external wall to expel the flue gases directly outside the building. A sophisticated microprocessor monitors performance and automatically shuts off the fire in the unlikely event of operation failure. This type of gas fire is an open fronted gas fire and as it comes with the flue system it has to be fitted on an external wall.

Balanced Flue Fires
Balanced Flue gas fires use a horizontal pipe to vent directly outside, the outer pipe draws air from the outside and the inner pipe expels combustion gases. An electricity supply is not required for Balanced Flue products. All these type of gas fires are glass fronted and as these fires come with there flue system they have to be fitted on an external wall as well.
 
Flueless fires incorporate the latest in gas fire technology however do not need a chimney or flue to operate or even an outside wall! Instead, the combustion gases pass through a catalytic converter system, positioned at the top of the appliance, which converts carbon monoxide into harmless carbon dioxide and water vapour, levels of which are so low they are typically present in fresh air. In fact, the catalytic converter works so effectively that it can actually help to clean the air by neutralising airborne particles and odours, therefore helping to reduce household allergies. Flueless gas fire have become a very popular especially in homes that have been built recently and come in various designs to suite any room style.

At fires2u we have over 200 gas fires and over 100 fires suitable for homes that do not have flue, so you really can find your perfect gas fire at fires2u so what are you waiting for - your fire is just click away!

Friday, 3 February 2012

Flueless Gas fires

Many customers of fires2u now live in modern properties that do not have chimneys or flues which standard gas fires need. However there is now many fires that are on the market that either come with the flue system like powerflue gas fires or balance flue gas fires, (these fires must be fitted on an external wall and the flue system that is supplied with the gas fire goes straight through the external wall) or another option which is becoming even more popular is Flueless gas fires

How Do Flueless Gas fires work?
Flueless gas fires incorporate the latest in gas fire technology and do not need a chimney or flue to operate. So how do they work? The combustion gases pass through a catalytic converter system, positioned at the top of the appliance, which converts carbon monoxide into harmless carbon dioxide and water vapour, levels of which are so low they are typically present in fresh air. In fact, the catalytic converter works so effectively that it can actually help to clean the air by neutralising airborne particles and odours, therefore helping to reduce household allergies. All flueless gas fire just like gas fires must be installed by a Gas Safe Engineer. Flueless fires are very popular with fitters as they are relatively simple to install and can be fitted in literally a fraction of the cost and time it takes to fit a conventional gas fire. Many Flueless gas fires also come with the option of either natural gas or lpg option therefore allowing a great variety of homes to be able to have these type of fires even if they do not have natural gas in the home.

At fires2u we currently have some great deals on LPG and Natural gas flueless gas fires please see below -

The Eko 5070 LPG Flueless gas fire is just £424 for a limited time only and is currently stock item so fast quick free delivery! The 5070 has crisp, clean lines reflect its simple modern aesthetic. The selective use of a monochromatic palette compliments any interior backdrop allowing the vibrant flames to become centre of attention. The Ekofire 5070 Flueless gas fire creates a stunning feature in any environment. The sophisticated flat-glass fascia with strong exterior angles creates a sense of understated elegance for the modern interior. Designed to fit a minimum room size of 30m3 (typically 11'6" x 11'6" with an 8' high ceiling) the eko 5070 an be installed on virtually any wall and gives you the freedom to create a stunning style statement without the limitations of a Flue or Chimney.


The Smeg Linear landscape Natural Gas Flueless fire requires no recess as simply hangs on any internal wall. This fire is also 100% efficient and is currently £639 with fast free delivery! Both functional and beautiful, the Smeg linear Flueless range combine technology with style and have been developed to inspire your ideas for expanding your living space, while at the same time offering exciting innovation that will arouse your mood and complement your lifestyle.

With no recess, Chimney or Flue required Smeg’s Flueless fire are designed to simply hang on any wall. Flueless gas fires convert 100% of gas to heat reducing fuel costs, which contributes to a greener and friendly environment by utilising the latest in catalytic technology.

Link


At fires2u your perfect flueless gas fire is just a click away so what are you waiting for buy today!